info@sonicmessiah.com                                                               +32497464688                                                                                          facebook


                                                                                          

                    Below are some examples of our custom work.

                    Each rack comes standard with a build in linear power supply for smooth operation, steel chassis with brushed or powder coated aluminium front panel.  

                    Available options are: 15 second ramped phantom power, FET DI on the front- or rear panel. VU metering.Transformer balanced in- and output option,

                    continuous variable or stepped in- and output attenuator, mechanical or relay based switching functions etc.

                    235 to 220V mains step down circuit to protect your precious vintage modules against todays higher mains voltages. ....

                                                  

<

2x TABV 72 with 11 step input attenuator,

ramped phantom power ,phase switch. 235 to 220V conversion. Empty racks also available.

1x TAB V76 with output attenuator, 15 sec ramped phantom power.

DI on the rear. VU meter. 4mm brushed aluminium engraved front panel

Vintage Urei 1108 with in- output attenuator, ramped phantom power , phase switch. DI.

2x TAB V76 with 20dB pad, ramped phantom power , phase switch. DI on the front. VU metering.  4mm powder coated engraved front panel

2x Telefunken V276 with 20dB pad, ramped phantom power , phase switch. DI on the front. output attenuator for creative saturation effects. Curved glass vintage VU meters.  Powder coated engraved front panel

2x Trident  CB 9054A limiters. Optional Sowter and Lundahl audio transformers on in- and outputs.


BBC AM9 dual preamp and AM22 dual eq modules.  48V, -20dB pad, phase reverse, FET DI, output control. 3mm powder coated front panel.

4 x Telefunken V676a microphone preamps. Relais switching for phase and phantom power.

4x Telefunken V776. phalntom, pad and mute switch.Brushed natural aluminium

front panel. Last two loaded racks available. check vintage gear

Aluminium lunchbox with 2X TELEFUNKEN V276 preamps and W295 eq's.

Phantom, phase and pad switch.

2x Studer 900 channelstrips in a 2U rack. Powder coated front panel. Optional FET DI inputs, output control and transformer balanced outputs.

2x Telefunken V672 preamps. A limited amount of these racked vintage preamps are available. Check the vintage gear page for further info.

4x TAB V72 preamps with 11 step input attenuator. 15 sec ramped phantom power. powder coated front panel, etc.

4x Siemens V276 with 11 step output attenuator for creative saturation effects. Powder coated front panel. 15 sec. ramped phantom power. Curved glass vintage VU meters.  



TAB V74a + Siemens W295b in a 3U rack. Ramped Phantom, phase switch.

11 step output attenuator.

2X BARTH U311 compressors + 2X TAB W395a Equalizers,

recapped and cleaned.4mm brushed front panel

2X FILTEK BKE4 compressors + 2X NEUMANN U473 compressors,


Wooden Lunchbox  with TAB V76. Mic/ Line input. Ramped phantom power. Output control. Mains voltage converted from 235 to 220V.  

BBC AM9 dual preamp and AM22 dual eq modules. 48V, -20dB pad, phase reverse, FET DI.

Siemens dual W293,W295a,W295b, W294 filters. calibrated in pairs for stereo use. Each module can be used in a daisy chain connection or individual. Termination switches take care of correct load to modern equipment.

2x Telefunken V672 preamps. A limited amount of this type of racked preamps available. Check the vintage gear page for further info.

TAB V76 with 20dB pad, ramped phantom power , phase switch. DI on the front. Output control and VU meter.  

Siemens U273 diode bridge compressors racked in a dual-mono configuration. The U273 is an excellent but rather static sounding compressor so we've added extra controls for more creative options.you can find a short video demo here