********** Card Configuration **********

  Super I/O Configuration Register 1 : 0x02
    *ZWS enable                      : *ZWS is not asserted
    *CSOUT-NSC-test or CS0 Pin Select: CS0
    Drive Mode Select                : PS/2
    Reserved                         : 0
    X-Bus Data Buffer Select         : No XDB buffer
    Lock Scratch Bit                 : Bits 7/6 are read only
    General Purpose Scratch Bit 0    : 0
    General Purpose Scratch Bit 1    : 0
  Super I/O Configuration Register 2 : 0x02

********** Logical device 0 (KBC/Keyboard) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x0060
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 1
  Interrupt Request Type Select 0    : 3 (level, high)
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none
  Configuration Register             : 0x40
    KBC Clock Source                 : 12 MHz

********** Logical device 1 (KBC/Mouse) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x0000
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 12
  Interrupt Request Type Select 0    : 3 (level, high)
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none

********** Logical device 2 (RTC and ATC) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x0070
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 8
  Interrupt Request Type Select 0    : 0 (edge, low)
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none

********** Logical device 3 (FDC) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x03f0
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 6
  Interrupt Request Type Select 0    : 3 (level, high)
  DMA Channel Select 0               : 2
  DMA Channel Select 1               : none
  Configuration Register             : 0x20
  Drive ID Register                  : 0x00

********** Logical device 4 (Parallel Port) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x0378
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 7
  Interrupt Request Type Select 0    : 0 (edge, low)
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none
  Configuration Register             : 0xf2

********** Logical device 5 (UART2 and Infrared) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x02f8
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 3
  Interrupt Request Type Select 0    : 3 (level, high)
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none
  Configuration Register             : 0x02

********** Logical device 6 (UART1) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x03f8
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : 4
  Interrupt Request Type Select 0    : 3 (level, high)
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none
  Configuration Register             : 0x02

********** Logical device 7 (GPIO Ports) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x0800
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : none
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none

********** Logical device 8 (Power Management) **********

  Activate                           : enabled
  I/O Range Check                    : 0
  I/O Range Check Control            : respond with 0x0055
  I/O Range Check Control            : disabled
  I/O Descriptor 0 Base Address      : 0x0380
  I/O Descriptor 1 Base Address      : 0x0000
  Interrupt Request Level Select 0   : none
  DMA Channel Select 0               : none
  DMA Channel Select 1               : none