|
TECHNICAL SPECIFICATIONS |
MC1 MKII |
| Casing | Manually milled and drilled aluminium. |
| Cover | 0,2 mm thick, coated with 24 ct. gold foil. |
| Color | Anodized in gold-colored finish (scratch resistant). |
| Terminals | Soft iron, shaped by grinding and milling. |
| Connector pins | 1,3 mm x 20 mm, 14 ct. solid gold pins. |
| Screw bushes | 2 mm brass threaded bushes mounded into casing. |
| Magnet | Permanent. (Cat.: rare earth magnet) |
| Power : max. BH (Kj/m3°) 280 |
|
| Coil | 2 mm x 2 mm, soft iron type c 1003 (handwound) |
| Coil windings | 15 micron copper hand-winding wire |
| Stylus holder | Solid Boron rod: 0,3 mm x 7 mm. |
| Angle of stylus in holder: 0°. |
|
| Stylus tip | TIP FG-S High Tech diamond, highly polished finish. |
| Rounded radius 2,5 micron. |
|
| Shock absorption | High Tech Rubber, 100 SCHOR |
| Tension wire | Steel wire spring, code 1007. |
|
TECHNICAL DATA
|
|
| Coil impedance | 22 Ohm |
| Load impedance | 100 Ohm |
| Load capacity | 150 pF |
| Stylus pressure | 1.8 grams, Max. tolerance 0,1 gram |
| Output voltage | 650 µV |
| Max. tracing capacity | 300 µmm |
| Channel separation | 70 dB at 100 Hz |
| 70 dB at 1 KHz | |
| 60 dB at 20 KHz | |
| Frequency range | 5 Hz to 80 KHz |
| Total THD % | 0.3 % |
| Total unit weight | 10 grams (incl. socket screws) |
| The
technical data specified above are dependent on the actual arm used in
the equipment. |
Test
Equipment : Goldmund Turntable / Air Tangent arm with exterior wiring NEUTRIK AUDIO TEST A 1 and TP 402 |
