| |
|
|
.: Amplifier ::
QSC RMX 850 |
- FTC 20 Hz - 20 kHz, 0.1% THD: 185 Wrms
- EIA 1 kHz, 0.1% THD: 200 Wrms
- Frequency Response: 20 Hz-20 kHz, ±1 dB
- Frequency Response: -3 dB points: 5 Hz - 50 kHz
- Damping Factor, 1 kHz and below: Greater than 300 at 8 ohms
- Input Impedance: 10k ohms unbalanced, 20k ohms balanced
- Input Clipping: 10 Vrms (+22 dB)
- Cooling: Continuously variable-speed fan, rear-to-front air flow
- Amplifier Protection: Stable into reactive or mismatched loads
- Load Protection: On/off muting, AC coupling
- Dimensions 483 x 89 x 400 mm
- Weight: 15,9 kg
|
|
| |
|
|
.: Speakers ::
LEM HP 350 |
- High: 1,5" driver on EWT horn
- Midrange: 8"
- Low: 15" woofer
- Power handling: Continuous: 350W / Peak: 700W
- Impedance: 8 ohm
- Passive crossover: 600 Hz @ 12dB/oct. ; 6 kHz @ 18dB/oct.
- Cabinet: MDF (Medium Density Fiber)
- Finish: black scratch-resistant paint; metal grid; 1 handle; speaker stand adapter
- Dimensions 453 x 782 x 400 mm
- Weight: 30 kg
- Frequency response: 38Hz - 25kHz
- Sensitivity: 122 dB (max SPL continuous)
- Dispersion (OxV): 120° x 40°
|
|
|
|
|
.: Mixer ::
Synq SMX-2 |
- 12 inputs (2mic + 7line + 3phono)
- Special matrix input selector for maximum flexibility
- 2 Master outputs:
- Master1 with signal trimming (balanced on XLR)
- Master2 (unbalanced on cinch/RCA)
- Gain and 3-band tone controls with kill function -30dB
- LED level meters with peak memory on all channels + Master
- Replaceable, VCA controlled, HQ faders with curve control
- Replaceable, VCA controlled, cross fader with curve control
- Easy A/B channel selection for cross fader
- Full featured phrase Sampler (16bit / 44,1kHz CD quality):
- Works with high-speed SD-cards up to 512MB
- Max. 100 memory banks with each 5 samples / SD Card
- Polyphony: 2 samples can be played together
- Seamless loops with editable begin and endpoints
- Sampler in/outputs assignable to any channel
- Full automatic beat counters
- Cross fader start control for compatible CD-players
- 2 Beat synchronized Cross fader mixing effects
- 8 Beat synchronized digital effects
with user programmable effect presets:
- Echo
- Autopan
- Flanger
- Manual filter
- Auto filter
- Reverb
- Trans
- Pitch Shifter
- Stereo effect send/return for external effect units
- Back-lighted LCD display for effects, sampler and beatcount
- Effect Cue function
- Adjustable DJ microphone talk-over function
- High power Phones output with "cue/pgm mixing" possibility
- Firmware upgradeable by SD-cards
|
|
|
|
|
.: Turntables ::
2x
Synq XTRM-1 |
- Very High Torque Direct Drive motor: 4.5kg/cm
- Extremely fast start, adaptable from 0.2 to 6 sec.
- Extremely fast stop, adaptable from 0.2 to 6 sec.
- 3 speeds: 33, 45, 78 rpm with quartz lock
- 3 Pitch adjustment ranges: +/-10% +/-20% +/-50%
- Forward / reverse play
- 2 Start / stop buttons for maximum flexibility
- Unbreakable white LED target light
- Phono/line switch toconnect your TT to any input
- All metal S-shaped tone arm assembly with:
- Counterweight
- Height adjustment with locking
- Anti-skating adjustment
- Lever lift with height adjustment
- Adjustable large feet for perfect leveling
|
|
|
|
|
.: Needles ::
2x
Ortofon Concorde Pro |
- Output voltage at 1000Hz, 5cm/sec: 5 mV
- Channel Balance at 1kHz: 1,5 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at -3 dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz 3dB/-2dB
- FIM distortion at recom. tracking force, DIN 45.542: < 1%
- Tracking ability at 315 Hz at recom. tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylys type: Spherical
- Stylus tip radius: R 18 µm
- Equivalent stylus tip mass: 0.5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge weight: 18,5 g
- Replacement stylus unit: Pro
|
|
|
|
|
.: Needles as reserve ::
2x
Stanton 505 SK II
Cartridge |
- Frequency Response 20 to 17 kHz
- Output @ 1kHz: 6.0mV
- Channel Separation @ 1 kHz: 27dB
- Channel Balance @ 1 kHz: within 2 dB
- Tracking Force: 2 to 5 grams
- Stylus Tip: Spherical .7 mil Super High Polish
- DC Resistance: 535 ohms
- Inductance: 400 mH
- Cartridge Weight: 5.5 grams
- Tracking Ability: 80µ @ 3 grams
- Recommended Load: 47k ohms and 275 pF
- Replacement Stylus: D5100SKII-T (clear tangerine);
- D5100SKII-T-DP (3/pk)
|
|
|
|
|
.: CD/MP3 Players ::
Synq CDX-2 |
- Full MP3 Playback (max. 999 MP3-files/255 Folders on 1 CD)
o MPEG1 layer3 (32 + 44,1 + 48kHz)
o MPEG2 layer3 (16 + 22,05 + 24kHz)
o MPEG2.5 layer3 (8 + 11,025 + 12kHz)
- Supports both CBR and VBR bitrate modes
- Alphanumeric VFD display (for CD-TEXT & MP3 ID3v2 tags)
- PCMS (Permanent Cue Memory System) for 5000 cue points and loops
- Autoloop function: makes automatic 4-Beat loops
- Loop cut/extend function (from 1/256 loop to 32/1 loop)
- 4 Hot Cue buttons can hold cue points/seamless loops
- Up to 4 Seamless loops for every track with reloop/stutter
- Seamless real-time loop edit function
- Visual marker for loop lengths
- Full automatic beat counters with extra TAP-function
- Pitch Lock (Master Tempo)
- Pitch ranges: +/-4% +/-8% +/-16% +/-100% (up to +/-16% on MP3)
- Pitch bend on jog wheel and buttons for perfect mixes
- Reads CD-DA, CD-R, CD-RW
- Anti-shock Memory 30seconds
- 1/75sec Frame search, also on MP3
- Real-time cue (“Cue on the fly”)
- Ultra fast memory start within 10msec
- Fader start, fader stop, (back cue) with auto cue function(-48dB)
- Relay play allows consecutive playback on two decks
- S/PDIF digital audio RCA coaxial
- 60 seconds Transport Protection
- Selectable elapsed, remain and total remain time display
- Single/continuous play
- Sleep mode (saves the life span of the laser)
|
|
|
|
|
.: Headphone ::
Synq HPS-2 |
- Transducers:High Power Drivers D=50mm
- Magnet type: Neodymium
- Frequency response: 15-22.000 Hz
- Sensitivity: 101dB (+/-3dB@1kHz)
- Impedance: 29 ohm (+/-15%)
- Maximum Power: 1000mW
- Cable length: 3m curled type
- Plug: 90° angled 3,5/6,3mm screw type Jack
- Headband: Adjustable, soft vinyl covered
- Ear Cushions: Soft vinyl covered foam
- Accessories: 1 extra 3,5mm to 6,3mm adapter + pouch
- Weight: 280g
|
|
|
|
|
.: Record Bag ::
Magma LP Bag 100
Blue/Black |
- Approximately for 90/100 12" records
- Durable construction with extra robust material
- Extra-thick padding on all sides for ultimate protection
- Stable comfortable carrying handled; padded shoulder strap
- 3 additional exterior pockets for accessories
- Quality zipper (water resistant) also for
- Zipper also for
padlock to secure the records inside
- Address tag attached
- Non-slippery rubber foot
- Contrasting inside lining colour creats visual impact
- Color: Blue/Black
- Dimension: 630 x 370 x 370 mm
- Weight: 2,24 kg
|
|
|
|
|